Researchers at Stanford and the UCLA Henry Samueli School of Engineering and Applied Science point the way toward manufacturing truly useful flexible electronics with high-performance organic transistors.
Flexible electronics made with organic, or carbon-based, transistors could enable technologies such as low-cost sensors on product packaging and “electronic paper” displays as thin and floppy as a placemat. But the best mass-producible organic transistors so far have only milquetoast performance, and products using them have yet to come to market. In a recent study published in the journal Nature, researchers at Stanford and the UCLA Henry Samueli School of Engineering and Applied Science point the way toward manufacturing truly useful flexible electronics with high-performance organic transistors.
The study’s lead author is Alejandro Briseno, a master’s student at UCLA performing a portion of this research at Stanford, is now a doctoral student at the University of Washington. The study’s other authors are Materials Science professor Yang Yang, Chemistry professor Fred Wudl, and Ricky J. Tseng at UCLA, and Stefan C. B. Mannsfeld, Mang M. Ling, Shuhong Liu, Colin Reese, Mark E. Roberts and Bao at Stanford.
Single-crystal organic transistors are fast—engineers say they have a high “charge carrier mobility.” This means that when they are “switched on,” electrical current can move through the crystal very quickly. Organic thin-film transistors, carbon-based versions of the kind of transistor commonly found in flat panel computer monitors, have only about a third the charge mobility. Researchers have nevertheless favored the thin-film transistors because they could be manufactured en masse, while single-crystal devices always had to be made by manual selection and placing of individual crystals.
“This represents a new technology milestone for the flexible electronics based on organic single crystals. It allows the organic crystals to be utilized in real electronic devices,” said UCLA’s Yang.
The trick to being able to manufacture—rather than handcraft—large arrays of single-crystal transistors was to devise a method for printing patterns of transistors on surfaces such as silicon wafers and flexible plastic. The first step is to put electrodes on these surfaces wherever a transistor is desired. Then the researchers make a stamp with the desired pattern out of a polymer called polydimethylsiloxane.
“This work demonstrates for the first time that organic single crystals can be patterned over a large area without the need to laboriously handpick and fabricate transistors one at a time,” says Bao, the corresponding author who conceived this idea.
After coating the stamp with a crystal growth agent called octadecyltriethoxysilane (OTS) and pressing it onto the surface, the researchers can then introduce a vapor of the organic crystal material onto the OTS-patterned surfaces. The vapor will condense and grow semiconducting organic single crystals only where the agent lies. With the crystals bridging the electrodes, transistors are formed.
In the experiments reported in the paper, the team made arrays out of several different crystal materials including rubrene (it makes the fastest transistors) and even “buckyballs,” soccer balls made out of 60 carbon atoms each. In some cases, the researchers were able to make simple grid patterns with crystals in areas as small as 8 hundred-millionths of a square inch (49 square microns). Although not nearly as packed as modern silicon processors or memory chips, with up to 13 million crystals per square inch, the team’s patterns could still yield richly functioning circuits and high-resolution displays.
In other experiments reported in the paper, the researchers showed that the transistor arrays printed on plastic continue to work well even after significant bending, a key finding for anything that will be used in flexible electronics.
Several further advances will be necessary before the team’s progress translates into commercial technologies. Among them is controlling how the crystals line up across the electrodes when the crystals form. Another key step will be ensuring better electrical contact between crystals and electrodes.
Still, the results show that organic single-crystal transistors are now feasible for making a variety of useful devices. “Until now, the possibility of fabricating hundreds of [organic single-crystal] devices on a single platform [had] been unheard of and essentially impossible from previous methods,” says lead author Briseno. “All of this can now be accomplished on an area the size of a human fingernail.”
The research was funded by a Bell Labs Graduate Research Fellowship, the Air Force Office of Scientific Research, a German research foundation fellowship, the National Science Foundation’s Center on Polymeric Interfaces and Macromolecular Assemblies and the Stanford School of Engineering.
For more information, click here.
To learn more about Professor Yang Yang, http://yylab.seas.ucla.edu/index.aspx.